Ultra High

[PILOT WARRIOR]

I decided to see how well the new computer would go on ultra high settings so I did a flight from Wanganui to New Plymouth.

Sadly it did not go to well but never to mind.

Leaving Wanganui (Scenery was set to the max but I changed it half way through)


Blue Sea


Hawera Aerodrome and Normanby Township


Default and Addon Scenery with Mt Ruapehu in the background

[PILOT WARRIOR]

New Plymouth Approach


Normally these are near the runway, not on them


Parked by my twin

[Zöltuger]

looks like you suffered from the same texture problems that i do when i turn everything on ultra high
by the way, there's a fix for the new plymouth VOR, i think lowellyerex made it.

[ronindanbo]

Yeh mip map levels I think??? I never have them on as they screw the pooch all the time.

[ZK-TJL]

by the way, there's a fix for the new plymouth VOR, i think lowellyerex made it.

That's affirmative...........David (lowellyerex) has put togeather a fix for this problem. I've got his email if you need it.

[ardypilot]

The first screenies are great- I found I had the blurry cockpit and aircraft texture problem when I installed FSX on my low spec system too

[Jimmy]

ow 5fps, nasty. Quite nice screenies thow

ll the new computer would go on ultra high settings so I did a flight from Wanganui to New Plymouth

I did this on a 600mhz machine wth fs9, the whole system just gave up and shut down

So what specs is your pc? Even I get better than 5frames over water like that..

[PILOT WARRIOR]

ow 5fps, nasty.  Quite nice screenies thow 

ll the new computer would go on ultra high settings so I did a flight from Wanganui to New Plymouth

I did this on a 600mhz machine wth fs9, the whole system just gave up and shut down

So what specs is your pc? Even I get better than 5frames over water like that..

Specs as follows:

Processor - ADM Athlonx2 3800+ (2 GHz) Dual Core

RAM - 512 MB

Video Card - Radeon x1300 (64 MB I think)

I adjusted the FPS from 20 to 30 and also autogen and scenery to the max

[Charl]

You should think about upping the RAM to 2GB, as a minimum.
It's out of step with your machine's capabilities.

[towerguy]

I agree - I also run an 3800x2 but with 2Gb ram and it seems to run most of what I want at reasonably good rates - even some of FSX.

[johanfrc]

Specs as follows:

Processor - ADM Athlonx2 3800+ (2 GHz) Dual Core

RAM - 512 MB

Video Card - Radeon x1300 (64 MB I think)

I adjusted the FPS from 20 to 30 and also autogen and scenery to the max

Well. I would say. Get some more RAM, and a new Video Card. FSX needs alot of hardware to run smoothly (I don't have FSX, but I know it from a couple of friends).

I don't know what soundcard you have, but I have seen that an onboard soundcard can get the FPS down. So deactivate the onboard soundcard, and get yourself a new plug-in card. They often have much better quality in the sound.