NZFF

by **gsnde** » Mon Jul 08, 2013 2:41 am

Just found this official request thread...

I would very much like to have some RNZAF repaints of Jordan More's Bell UH-1 Iroquois AI model. The model can be found here at the Hovercontrol website. There is a Paint kit available as well. Also here a list of serials.

by **Ian Warren** » Mon Jul 08, 2013 9:31 am

A thought , our own Deane Baunton has a great UH-1 , sure it works in FSX least it did pre SPs and would suit your AI packages , a little attention to add some photo detail to and serials it would work a treat , be an ideal task for a budding newbie painter

by **gsnde** » Tue Jul 09, 2013 3:00 am

That sounds promising, Ian. Is it a true multi-loded AI model? Would it be the one included in the RNZAF Redux 1 package?

by **Ian Warren** » Tue Jul 09, 2013 8:53 am

gsnde wrote:
QUOTE (gsnde @ Jul 9 2013,4:00 AM) <{POST_SNAPBACK}>
Is it a true multi-loded AI model? Would it be the one included in the RNZAF Redux 1 package?

Deane would be able to give you the stats on that - but i'd be sure it will have any affect on the frames at all .

by **ThinkingManNeil** » Tue Jul 30, 2013 5:48 am

Anyone know of any FSX repaints for NZ-based Beech 18's or Rick Piper's Aeroprakt A-22 Foxbat?

N.

by **Snowman** » Tue Jul 30, 2013 3:08 pm

Anyone know of any New Zealand repaints for the Carenado Cessna 340 II ???

Lawrie.

by **cooldad** » Mon Nov 25, 2013 8:49 pm

Anyone know of or willing to do a paint job on the Alabeo Piper PA38 from the Wellington Aero Club?

Photo below:

I did a trial flight in this and really love this little aircraft

Cheers,
Paul

by **Ian Warren** » Mon Nov 25, 2013 10:34 pm

Paul you should give it a go yourself , you would love the tinker around and plenty here to help out ... you are'nt short of resource material and good free ware programs .

by **cooldad** » Tue Nov 26, 2013 7:56 am

Ian Warren wrote:
QUOTE (Ian Warren @ Nov 25 2013,11:34 PM) <{POST_SNAPBACK}>
Paul you should give it a go yourself , you would love the tinker around and plenty here to help out ... you are'nt short of resource material and good free ware programs .

Yes I might just give it a try. Finding time at the moment will be a challenge. The house is being renovated while we are still living in it! Got no laundry or bathroom and a toilet that you flush with buckets

Only a few more weeks to go <sigh>

I hope this paintkit is easy to use. Never done this before.

Thanks Ian,

Paul

by **Ian Warren** » Tue Nov 26, 2013 8:29 am

You have plenty of help from the regulars here , not sure what the Alabeo Tomhawk or the one model i here , surely it should one template .

by **SeanTK** » Sun Jan 26, 2014 3:05 pm

Repaint request for Nemeth Designs Mi-24D "Hind-D" for FSX:

United Nations
http://www.journal.forces.gc.ca/vol10/no1/...n%20varey-6.jpg

by **Ian Warren** » Sun Jan 26, 2014 3:22 pm

I don't have the Hind , but that is one impressive photo, I meaning to complete another paint, Just been a little busy with setting myself up, website and now signage ... artwork on hold at the mo along with anything flightsim work related .. but that is one wicked shot !

by **KiwiSpitfire** » Thu Feb 06, 2014 11:31 am

I don't supose anyone would be keen to do an Aermacchi MB339-CB skin for the Lotus L-39 by any chance...please?

I worked on these for 5 years back in the day - got up for several rides which was pretty cool.

by **tomkilpatrick** » Thu Feb 06, 2014 12:00 pm

I would love whoever even attempts to make this. Boyhood dream.

by **Ian Warren** » Thu Feb 06, 2014 12:25 pm

Be a little embarrassing to put this scheme onto a L-39 .. the freeware http://www.fs-freeware.net/downloads/viewd...acchi-mb339-pan I do believe dose have a RNZAF scheme floating around somewhere.

by **tomkilpatrick** » Thu Feb 06, 2014 1:59 pm

I did see a repaint for the L39 that's flown at airshows around NZ. The nice blue camouflage one. I'll pop in a link if I can find it again.

EDIT: Here it is.

by **Ian Warren** » Thu Feb 06, 2014 2:40 pm

They go a whiles back but it is superb in multiplay and with shared cockpit

by **KiwiSpitfire** » Thu Feb 06, 2014 4:33 pm

Ian Warren wrote:
QUOTE (Ian Warren @ Feb 6 2014,1:25 PM) <{POST_SNAPBACK}>
Be a little embarrassing to put this scheme onto a L-39 .. the freeware http://www.fs-freeware.net/downloads/viewd...acchi-mb339-pan I do believe dose have a RNZAF scheme floating around somewhere.

I am not sure why you would think that at all?? I spent a long time working on these, flying in them and building them from bits in a box after they have come back from Italy following a belly-landing..oops, and have no problems painting up the L-39 in the same colours whatsoever. I mean come on - the Albatross is essentially the forefather to the 339...which followed it's design VERY closely! Excert from the L-39 manual....

From a design and engineering standpoint the L-39C was the first single engine jet trainer
to 'get it all right' and its design features were heavily imitated in later jet trainers from
other manufacturers, such as the British Aerospace Hawk and Aermacchi MB-339.

Thanks Tom for the heads-up about the blue one - have grabbed that one already as have been down to Ardmore and checked it out in person - nice aircraft. Still keen for a 14SQN skin, they were some good times...

by **Ian Warren** » Thu Feb 06, 2014 5:03 pm

In the trainer real world and ability , Its the other way around and funny enough both come from 50's generation .. the Mac's always had the extra thrust were as the Aero's when and reduced the power .. no compare to the final variants and the Hawk is in a class off its self compare to both latter's.

by **Naki** » Thu Feb 06, 2014 8:25 pm

I for one would also like to see the L39 in RNZAF Macchi colours. There are a couple of other NZ schemes fir L39s floating around including a metallic blue one that lives in Nelson.

Just read today another L39 has arrived in the country and is living in Tauranga but is bare metal at this stage won't US reg.

NZFF

Repaint Requests

Who is online