Print view
Board index New Zealand FlightsimScenery

Queenstown problem

An area to discuss scenery addons for virtual NZ
Post a reply

Postby omitchell » Thu Mar 08, 2007 1:15 pm

Ok interesting problem in Queenstown, Anyone got any ideas? Im using:

FS2004
Flight Environment
Ground Environment Pro
Red Baron Mesh & Landclass
Photoreal Queenstown
Lakes & Rivers
Pretty much everything you can think of (This things loaded)

user posted image
Image
Founder and Former CEO of VANZ

"You land a million planes safely, then you have one little mid-air
and you never hear the end of it."
Air Traffic Controller, New York TRACON
Westbury, L.I
User avatar
omitchell
Senior Member
 
Topic author
Joined: Fri Jun 23, 2006 1:27 pm
Posts: 1960
Location: Auckland
Top

Postby toprob » Thu Mar 08, 2007 1:55 pm

You really need the Red Baron Topo for this.
User avatar
toprob
NZFF Pro
 
Joined: Sat Apr 29, 2006 4:56 pm
Posts: 6711
Location: Upper Hutt
Top

Postby ardypilot » Thu Mar 08, 2007 2:51 pm

Yep, the payware Red baron entertainment topographic data set fixes all the lakes and coast mesh problems in NZ. It's well worth is money when combined with the payware 20m mesh too :D
User avatar
ardypilot
NZFF Pro
 
Joined: Wed Apr 26, 2006 10:01 am
Posts: 6802
Location: Auckland
Top

Postby Snowman » Thu Mar 08, 2007 3:19 pm

Gudday Owen.
Yep,........... Rob and Andrew are correct. The Red Baron NZ Topo is the only answer for this problem.
It fixes a some VERY noticible errors such as the cliffs and lake level at Queenstown , also fixes the HUGE cliff and wrong water level at Mt. Cook airport as well, and another very noticable one it fixes is the lake level at Rotorua, be it the default airport, or Robs RealNZ Rotorua.
Very WELL WORTH the few measly $$$ spent on buying it, for ALL that it does all over NZ !! :thumbup:

Lawrie. >nzflag<
Last edited by Snowman on Thu Mar 08, 2007 3:21 pm, edited 1 time in total.
Image

Image
User avatar
Snowman
NZFF Pro
 
Joined: Wed Jul 26, 2006 3:52 pm
Posts: 2427
Location: Tauranga, NZ.
Top

Postby Bingobob » Fri Mar 09, 2007 6:20 am

You dont need the 20m mesh to fix this problem.

Check your installation of the Lakes and Rivers fix, You may have it installed incorrectly.

Dont have to use payware to enjoy New Zealand, I was gifted a Rivers & Roads last week. Might Gift it on as it is not very good oh before anyone jumps in the air there is more than one edition of Rivers and Roads in circulation.
Last edited by Bingobob on Fri Mar 09, 2007 6:25 am, edited 1 time in total.
Bingobob
 
Top

Postby ardypilot » Fri Mar 09, 2007 8:08 am

You dont need the 20m mesh to fix this problem.

Nope, its the topo that does it. See above.

Check your installation of the Lakes and Rivers fix

Isn't that just for fs2002?
User avatar
ardypilot
NZFF Pro
 
Joined: Wed Apr 26, 2006 10:01 am
Posts: 6802
Location: Auckland
Top

Postby Snowman » Fri Mar 09, 2007 9:01 am

Trolly wrote:
You dont need the 20m mesh to fix this problem.

Nope, its the topo that does it. See above.

Check your installation of the Lakes and Rivers fix

Isn't that just for fs2002?

Andrew is correct. The NZ Lakes and Rivers fix was originally for FS2002. It made a minor improvement to Queenstown in FS2004, but still CANNOT correct all the wrong levels etc that the NZ Topo does.
Yes, you dont need 20m mesh to correct this problem. The NZ Topo works fine in the 75m freeware mesh, or with no mesh, but once you have 20m mesh, the difference that it makes to the look of NZ is AMAZING !! Once again, for the few measly $$$ that you would pay for it, WELL worth it !! :thumbup:

Lawrie. >nzflag<
Image

Image
User avatar
Snowman
NZFF Pro
 
Joined: Wed Jul 26, 2006 3:52 pm
Posts: 2427
Location: Tauranga, NZ.
Top

Postby omitchell » Sat Mar 10, 2007 10:05 am

Yeah unfortunatly the Misses now has a 4th horse which arrived yesterday (Mutters something admins would ban me for) so buying the mesh aint an option just yet. Odd thing is tho this is only a recent issue, 2 weeks ago, that problem wasnt there and the only thing thats been installed since was F1 ground environment pro (Which was basically a reinstall anyways)

After uninstalling F1 GEP problem was still there so yeah....
Image
Founder and Former CEO of VANZ

"You land a million planes safely, then you have one little mid-air
and you never hear the end of it."
Air Traffic Controller, New York TRACON
Westbury, L.I
User avatar
omitchell
Senior Member
 
Topic author
Joined: Fri Jun 23, 2006 1:27 pm
Posts: 1960
Location: Auckland
Top

Postby Christian » Sat Mar 10, 2007 11:05 am

Hi Owen

Let's backtrack a bit.

Do you have the NZ topo / Roads & Rivers?

Do you have my old 'lake fix'?

Tell your Misses to put the horses onto a diet :unsure: ;)

Cheers,
Christian
Breathtakingly gorgeous FS landscapes for New Zealand.
Visit Sim Pilot Experience now:
http://www.simpilotexperience.com
Follow me on twitter:
http://www.twitter.com/ChristianStock
User avatar
Christian
Forum Addict
 
Joined: Sun Apr 30, 2006 12:03 pm
Posts: 426
Location: melbourne
Top

Postby omitchell » Sat Mar 10, 2007 12:35 pm

Yes i have the 75m Mesh and Landclass from Red Baron, and roads & rivers and your old lake fix
Image
Founder and Former CEO of VANZ

"You land a million planes safely, then you have one little mid-air
and you never hear the end of it."
Air Traffic Controller, New York TRACON
Westbury, L.I
User avatar
omitchell
Senior Member
 
Topic author
Joined: Fri Jun 23, 2006 1:27 pm
Posts: 1960
Location: Auckland
Top

Postby Snowman » Sat Mar 10, 2007 1:07 pm

Hmmmmm,............. think the old FS2002 Lakes Fix might be your problem Owen.
If you have Christian's Red Baron NZ Topo/Roads & Rivers installed as well, it tells you in the instructions under the heading "Pre-Installation" to
[ REMOVE all previously installed add-on New Zealand sceneries that modify water bodies or roads, as these may conflict with this scenery, and potentially cause inferior quality ] .


Lawrie.
Image

Image
User avatar
Snowman
NZFF Pro
 
Joined: Wed Jul 26, 2006 3:52 pm
Posts: 2427
Location: Tauranga, NZ.
Top

Postby Christian » Sat Mar 10, 2007 4:13 pm

Yes Owen. As Lawrie wrote, get rid of the old lake fix and the water levels will be back to normal.

Christian
Breathtakingly gorgeous FS landscapes for New Zealand.
Visit Sim Pilot Experience now:
http://www.simpilotexperience.com
Follow me on twitter:
http://www.twitter.com/ChristianStock
User avatar
Christian
Forum Addict
 
Joined: Sun Apr 30, 2006 12:03 pm
Posts: 426
Location: melbourne
Top

Postby omitchell » Wed Mar 14, 2007 7:51 am

Errr found the problem, in my mass reinstall on new pc following old pc catching fire (Dont ask...) It seems the problem was that Your lakes and rivers fix wasn't installed. Have installed that now and its fixed up my queenstown tsunami.

Sorry about that. Must have totally overlooked it, but then installing over 50Gb of scenery and another 40 of aircraft and AI.... I feel like a complete goof right about now :whoops:

Thanks to all those that replied
Image
Founder and Former CEO of VANZ

"You land a million planes safely, then you have one little mid-air
and you never hear the end of it."
Air Traffic Controller, New York TRACON
Westbury, L.I
User avatar
omitchell
Senior Member
 
Topic author
Joined: Fri Jun 23, 2006 1:27 pm
Posts: 1960
Location: Auckland
Top

Postby Christian » Wed Mar 14, 2007 11:22 am

great you got it sorted!
Breathtakingly gorgeous FS landscapes for New Zealand.
Visit Sim Pilot Experience now:
http://www.simpilotexperience.com
Follow me on twitter:
http://www.twitter.com/ChristianStock
User avatar
Christian
Forum Addict
 
Joined: Sun Apr 30, 2006 12:03 pm
Posts: 426
Location: melbourne
Top

Postby omitchell » Wed Mar 14, 2007 2:57 pm

Yeah I did, but still feel dumber then the eggplant im cooking for dinner
Image
Founder and Former CEO of VANZ

"You land a million planes safely, then you have one little mid-air
and you never hear the end of it."
Air Traffic Controller, New York TRACON
Westbury, L.I
User avatar
omitchell
Senior Member
 
Topic author
Joined: Fri Jun 23, 2006 1:27 pm
Posts: 1960
Location: Auckland
Top

Postby Matthew » Sat Mar 17, 2007 1:54 pm

Christen,

I'm having the same problem as Lawrie at Queenstown, refered to in this topic.

I have the Red Baron Topo and 20m Mesh, and Peter Lohr's Queenstown scenery.

I have removed the NZ Lakes Fix (2002).

Snowman wrote:I just fifnished re-installing the topo, and i have 1 of each file mentioned on OCEN/SCENERY folder,  eg: 1x HL992470.bgl and 1x HL992470.bglx  .  Should there be both entries in there, 1 in .bgl and the other .bglx at the same time ??
All the files mentioned on your page have duplicate entries, 1x .bgl, and 1x .bglx

Lawrie.
Quoted from this topic

Does anybody have a full list of the files that need to be renamed/disabled in the FS9/scenery/OCEN/scenery folder?

Thanks in advance :)

Matthew
Last edited by Matthew on Sat Mar 17, 2007 1:55 pm, edited 1 time in total.
Matthew McTague
NZFF Moderator
VATNZ - TMA Controller
Student Pilot
ICT Guru

Image
User avatar
Matthew
Forum Addict
 
Joined: Fri Sep 08, 2006 1:26 pm
Posts: 321
Location: Timaru, New Zealand
Top

Postby Snowman » Sat Mar 17, 2007 3:05 pm

Matthew, heres a list of the files to be renamed..................

RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL992470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL992470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL992480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL992480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL993440.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL993440.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL993460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL993460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL993470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL993470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL993480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL993480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL994440.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL994440.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL994450.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL994450.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL994460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL994460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL994470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL994470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL995450.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL995450.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL995460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HL995460.bglx" );

RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP992470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP992470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP992480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP992480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP993440.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP993440.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP993460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP993460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP993470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP993470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP993480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP993480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP994440.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP994440.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP994450.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP994450.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP994460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP994460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP994470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP994470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP995450.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP995450.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP995460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\HP995460.bglx" );

RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST992470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST992470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST992480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST992480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST993460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST993460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST993470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST993470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST993480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST993480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST994440.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST994440.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST994450.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST994450.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST994460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST994460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST994470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST994470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST995450.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST995450.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST995460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\ST995460.bglx" );

RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD992470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD992470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD992480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD992480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD993460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD993460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD993470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD993470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD993480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD993480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD994440.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD994440.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD994450.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD994450.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD994460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD994460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD994470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD994470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD995450.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD995450.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD995460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RD995460.bglx" );

RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR992480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR992480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR993460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR993460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR993470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR993470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR993480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR993480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR994440.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR994440.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR994450.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR994450.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR994460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR994460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR994470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR994470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR995450.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR995450.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR995460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\RR995460.bglx" );

RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\BR9OCEN0.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\BR9OCEN0.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\BR9OCEN1.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\BR9OCEN1.bglx" );

RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT992480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT992480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT993460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT993460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT993470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT993470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT993480.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT993480.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT994440.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT994440.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT994460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT994460.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT994470.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT994470.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT995450.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT995450.bglx" );
RenameFile( TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT995460.bgl", TARGETDIR ^ "\\Scenery\\Ocen\\scenery\\UT995460.bglx" );


Lawrie >nzflag<
Image

Image
User avatar
Snowman
NZFF Pro
 
Joined: Wed Jul 26, 2006 3:52 pm
Posts: 2427
Location: Tauranga, NZ.
Top

Postby Alex » Sat Mar 17, 2007 5:00 pm

Wow Lawrie, I reckon you're a living library of NZ scenery fixes and mods, really great. :clap:

Alex
Last edited by Alex on Sat Mar 17, 2007 5:00 pm, edited 1 time in total.
Alex
NZFF Pro
 
Joined: Fri Jul 14, 2006 3:39 pm
Posts: 3620
Top

Postby Snowman » Sat Mar 17, 2007 11:48 pm

Alex wrote: Wow Lawrie, I reckon you're a living library of NZ scenery fixes and mods, really great. :clap:

Alex

Heh heh, thanks Alex. Dunno about the "living library of fixes" bit, but only too happy to help out wherever i can, if its something i have the knowledge of.

Lawrie. >nzflag<
Image

Image
User avatar
Snowman
NZFF Pro
 
Joined: Wed Jul 26, 2006 3:52 pm
Posts: 2427
Location: Tauranga, NZ.
Top

Postby Matthew » Mon Mar 19, 2007 7:50 am

That worked perfectly! :clap: Thank you :D

Matthew
Last edited by Matthew on Mon Mar 19, 2007 7:50 am, edited 1 time in total.
Matthew McTague
NZFF Moderator
VATNZ - TMA Controller
Student Pilot
ICT Guru

Image
User avatar
Matthew
Forum Addict
 
Joined: Fri Sep 08, 2006 1:26 pm
Posts: 321
Location: Timaru, New Zealand
Top
Next
Post a reply

Return to Scenery

Who is online

Users browsing this forum: No registered users and 10 guests

The team • Delete all board cookies • All times are UTC + 12 hours
Board index