NZFF

by **deeknow** » Fri Apr 22, 2011 3:15 pm

Fantastic looking model, due for release in May:
http://www.wilcopub.com/harrier-jump-jet-5928.html

Surprised noone has mentioned this project from Wilco, and wondering it its the Razbam Harrier project that they've picked up and re-bagded, anyone know?

by **Splitpin** » Mon Apr 25, 2011 6:04 pm

deeknow wrote:
QUOTE (deeknow @ Apr 22 2011,3:15 PM) <{POST_SNAPBACK}>
Fantastic looking model, due for release in May:
http://www.wilcopub.com/harrier-jump-jet-5928.html

Surprised noone has mentioned this project from Wilco, and wondering it its the Razbam Harrier project that they've picked up and re-bagded, anyone know?

Now that is a "must add"......Thanks deeknow

by **Ian Warren** » Mon Apr 25, 2011 6:55 pm

A GR-3 , maybe everyone,s must buy Jet and the package ...... Come to think be the first package i will buying from the Wilco Group

by **Splitpin** » Mon Apr 25, 2011 7:28 pm

I was waiting for you to say "its a stopgap" for...whatever....in which case i would be over to your place in a flash....and make you look at endless Air**** pics......while writing "i dont mind what happened to Wigram" a thousand times

I think some of the Wilco stuff is pretty good....somewhere Ive got their pilot in command 737 series....worked for me.

by **Naki** » Mon Apr 25, 2011 7:31 pm

deeknow wrote:
QUOTE (deeknow @ Apr 22 2011,3:15 PM) <{POST_SNAPBACK}>
Fantastic looking model, due for release in May:
http://www.wilcopub.com/harrier-jump-jet-5928.html

Surprised noone has mentioned this project from Wilco, and wondering it its the Razbam Harrier project that they've picked up and re-bagded, anyone know?

The Wilco Harier is made by Aeroplane Heaven..Razbams Harrier is a different model and are planning the GR-3/5/7 IIRC...Miliviz is also making a Harrier..so Harriers galore if they all come to fruition as there is a freeware model also been made

by **scrubcutter** » Mon Apr 25, 2011 7:47 pm

Been waiting for a decent Harrier for FSX for ages. Going to be a tough decision whether to go for this or the Jet Thunder sim. Anyone shed some light on previous Wilco/AH software? Would be interesting to get a comparison of where they sit alongside comparative mil/warbird designers that I do already have such as A2A at the top end down through Iris, FSD, Alphasim to FCS at the bottom end (my opinion only here, each designer has merits and limitations) of the functionality and realism scale

by **Splitpin** » Mon Apr 25, 2011 8:27 pm

Naki wrote:
QUOTE (Naki @ Apr 25 2011,7:31 PM) <{POST_SNAPBACK}>
The Wilco Harier is made by Aeroplane Heaven..Razbams Harrier is a different model and are planning the GR-3/5/7 IIRC...Miliviz is also making a Harrier..so Harriers galore if they all come to fruition as there is a freeware model also been made

Good news , thanks for that Naki. Now we just need that Bucc, and a good Lightning (EE)

by **connor** » Tue Apr 26, 2011 9:41 am

Looks amazing if the video is anything to go by!

by **deeknow** » Wed May 11, 2011 8:23 am

Harrier released now...
http://www.wilcopub.com/simulator-add-on/h...p-jet-5928.html

by **connor** » Wed May 11, 2011 9:01 am

Splitpin wrote:
QUOTE (Splitpin @ Apr 25 2011,7:28 PM) <{POST_SNAPBACK}>
I was waiting for you to say "its a stopgap" for...whatever....in which case i would be over to your place in a flash....and make you look at endless Air**** pics......while writing "i dont mind what happened to Wigram" a thousand times

Then you can start on the GA aircraft!

Splitpin wrote:
QUOTE (Splitpin @ Apr 25 2011,7:28 PM) <{POST_SNAPBACK}>
I think some of the Wilco stuff is pretty good....somewhere Ive got their pilot in command 737 series....worked for me.

I really want the 737, simply because it's the only decent 737-300 out there, but I'm running Windows 7 64bit. Darn!

by **husker** » Wed May 11, 2011 9:11 am

connor wrote:
QUOTE (connor @ May 11 2011,9:01 AM) <{POST_SNAPBACK}>
Then you can start on the GA aircraft!

I really want the 737, simply because it's the only decent 737-300 out there, but I'm running Windows 7 64bit. Darn!

Wilco 737-300 works fine on Windows 7 - 64 - my fav plane (until PMDG release their NG!)

by **connor** » Wed May 11, 2011 11:37 am

husker wrote:
QUOTE (husker @ May 11 2011,9:11 AM) <{POST_SNAPBACK}>
Wilco 737-300 works fine on Windows 7 - 64 - my fav plane (until PMDG release their NG!)

Really? At the bottom of the 737 page at PC Aviator there is this "Note: This product does not work with 64 bit operating systems. Will only work with 32 bit."

by **Ian Warren** » Wed May 11, 2011 11:47 am

Ive been jumping around for this one

by **husker** » Wed May 11, 2011 11:48 am

connor wrote:
QUOTE (connor @ May 11 2011,11:37 AM) <{POST_SNAPBACK}>
Really? At the bottom of the 737 page at PC Aviator there is this "Note: This product does not work with 64 bit operating systems. Will only work with 32 bit."

Nah - works fine. Just buy the 'Vista' version

by **connor** » Wed May 11, 2011 12:55 pm

Choice!

by **b1m2d3** » Fri May 13, 2011 7:59 pm

husker wrote:
QUOTE (husker @ May 11 2011,12:48 PM) <{POST_SNAPBACK}>
Nah - works fine. Just buy the 'Vista' version

I find that rather odd. I bought the 737 PIC from Wilco when I was running XP-32 bit. When I got my new rig with Windows 7-64, I didn't even think about it and just installed the 737 on it and have had no issues. <shrugs>

Thanks for the link to the Harrier!

Seems Wilco is stepping out of the box a bit with this one as they typically make/publish commercial airliners. Correct me if I'm wrong.

Damn another aircraft to learn.

by **Ian Warren** » Fri May 13, 2011 8:09 pm

I think it still has many issues that passed BETA , already mention a patch incoming so early with such a prolific type and with history - but experience shows this was quite a bit rushed .

by **connor** » Sat May 14, 2011 6:09 am

b1m2d3 wrote:
QUOTE (b1m2d3 @ May 13 2011,7:59 PM) <{POST_SNAPBACK}>
Damn another aircraft to learn.

Tell you what mate, that's all I spend my time doing! Switching between fs and the manual!

by **b1m2d3** » Sat May 14, 2011 7:39 am

connor wrote:
QUOTE (connor @ May 14 2011,7:09 AM) <{POST_SNAPBACK}>
Tell you what mate, that's all I spend my time doing! Switching between fs and the manual!

haha.. yea same here. I did get a chance to dl this new Harrier Jet last night, but it was pretty late so I only had time to take it for a spin around the block. All I can say is, I can't wait to dig into this bird tonight.

by **Ian Warren** » Sat May 14, 2011 1:57 pm

Problem fixed

, took a while , re-downloaded , must have been the Christmas rush - Hovers like a bumble bee

There are still a few minor corrections to the model , increased intake doors open incorrect be interesting to see what extra they do .

NZFF

Harrier jump-jet from Wilco

Who is online