NZFF

by **dask77** » Sat Jul 18, 2009 10:31 am

i need help if u have this aircraft , can you help ? first thing is how do i get the panel to show up ? and second how do i add repaints ?

thanks darren

by **AlisterC** » Sat Jul 18, 2009 11:23 am

Have you tried the official support forum first?
http://atr.flight1.net/forums/

Edit: I see you are there newest member so I guess you have

by **dask77** » Sat Jul 18, 2009 11:44 am

yeah i have and no one is answering my post they and i have fsx

by **Adamski** » Sat Jul 18, 2009 11:52 am

dask77 wrote:
QUOTE (dask77 @ Jul 18 2009, 10:31 AM) <{POST_SNAPBACK}>
i need help if u have this aircraft , can you help ? first thing is how do i get the panel to show up ? and second how do i add repaints ?

Is this in

or

?

I have mine running fine in

- with a NZ Repaint:

Mike Stone AirNZ Link Mt Cook or Flight1 AirNZ Link Mt Cook

by **dask77** » Sat Jul 18, 2009 3:34 pm

mine is fsx so if u can help me please do

by **hoki1185** » Sat Jul 18, 2009 4:36 pm

dask77 wrote:
QUOTE (dask77 @ Jul 18 2009, 10:31 AM) <{POST_SNAPBACK}>
i need help if u have this aircraft , can you help ? first thing is how do i get the panel to show up ? and second how do i add repaints ?

thanks darren

I had a similar problem with panel and resolved it by adjusting setting sliders in FSX.

by **dask77** » Sat Jul 18, 2009 4:39 pm

done that and still dosent show up

hoki1185 wrote:
QUOTE (hoki1185 @ Jul 23 2009, 04:36 AM) <{POST_SNAPBACK}>
I had a similar problem with panel and resolved it by adjusting setting sliders in FSX.

by **Adamski** » Sat Jul 18, 2009 4:55 pm

dask77 wrote:
QUOTE (dask77 @ Jul 18 2009, 03:34 PM) <{POST_SNAPBACK}>
mine is fsx so if u can help me please do

Have you applied the update? When you say you have a black panel, do you mean the insruments don't light up? Are you aligning the GPS?

by **dask77** » Sat Jul 18, 2009 6:18 pm

yes i have appiled the updates yes insurments do not light up what do u mean by aligning the gps?

Adamski wrote:
QUOTE (Adamski @ Jul 23 2009, 04:55 AM) <{POST_SNAPBACK}>
Have you applied the update? When you say you have a black panel, do you mean the insruments don't light up? Are you aligning the GPS?

by **Adamski** » Sun Jul 19, 2009 5:05 pm

dask77 wrote:
QUOTE (dask77 @ Jul 18 2009, 06:18 PM) <{POST_SNAPBACK}>
yes i have appiled the updates yes insurments do not light up what do u mean by aligning the gps?

Wups - sorry - wrong plane!

1) Do you use the Flight1 configurator to set the aircraft up? (atrconfig.exe)
2) If so, are you starting "Cold and Dark" or "ready for Taxi - Engines Running"?
3) Are you setting up the FMC?

There's a certain set of steps for starting from "dark" ... but I'll wait to hear on the above first.

by **dask77** » Sun Jul 19, 2009 10:15 pm

yes i have use the configurator and i have try cold and dark to ready for taxi and still nothing

Adamski wrote:
QUOTE (Adamski @ Jul 24 2009, 05:05 AM) <{POST_SNAPBACK}>
Wups - sorry - wrong plane!

1) Do you use the Flight1 configurator to set the aircraft up? (atrconfig.exe)
2) If so, are you starting "Cold and Dark" or "ready for Taxi - Engines Running"?
3) Are you setting up the FMC?

There's a certain set of steps for starting from "dark" ... but I'll wait to hear on the above first.

by **Adamski** » Mon Jul 20, 2009 6:47 pm

dask77 wrote:
QUOTE (dask77 @ Jul 19 2009, 10:15 PM) <{POST_SNAPBACK}>
yes i have use the configurator and i have try cold and dark to ready for taxi and still nothing

I just did a complete start from dark - and documented it as I went. I'll PM you the procedure if needs be.

BUT ... it occurred to me that it may simply be because you're not un-dimming the HSI <???>.

Fiddle with the *outer* rings on those two rotary knobs. You may need to do this for both pilot and co-pilot EFIS displays.

by **dask77** » Mon Jul 20, 2009 10:19 pm

what is the hsi and where do u find it and pm me and we can talk more bout this ok

Adamski wrote:
QUOTE (Adamski @ Jul 25 2009, 07:47 AM) <{POST_SNAPBACK}>
I just did a complete start from dark - and documented it as I went. I'll PM you the procedure if needs be.

BUT ... it occurred to me that it may simply be because you're not un-dimming the HSI <???>.

Fiddle with the *outer* rings on those two rotary knobs. You may need to do this for both pilot and co-pilot EFIS displays.

by **Adamski** » Mon Jul 20, 2009 10:58 pm

dask77 wrote:
QUOTE (dask77 @ Jul 20 2009, 10:19 PM) <{POST_SNAPBACK}>
what is the hsi and where do u find it and pm me and we can talk more bout this ok

I'll PM you later ... just sloping off to bed

HSI is the Horizontal Situation Indicator ... the lower gauge. The ADI is the top yellow/blue thingie. But you need to bring up the EFIS panels via those two little icons on the bottom left (I put a red box around them). After that, try fiddling with those two rotaries (also with a red box in the pic). One is for the HSI, the other for the ADI.

You should have a pretty comprehensive PDF manual with the ATR. It's well over the top (!!) but it's worth ploughing through - particularly with respect to setting up the FMC.

I forgot to ask - are you getting as far as starting the engines ... but just can't see the gauges?

by **hoki1185** » Tue Jul 21, 2009 7:53 am

This might help.Go to Flight One website technical support section.Select ATR 72-500.Then select ATR bug list and at top of list will come up 'missing cocpit and exterior'.Take it from there to download remedy.

by **bennz** » Thu Jul 23, 2009 12:17 pm

Sometimes this issue happens due to missing true fonts in windows font directory. I am not sure what is the specific font(s) for this plane but you can google missing font for atr and you might get some results.

I had similar problem with PSS 777 and it was resolved after I downloaded and added the required font.

Admaski's help would be the solution to your problem too : )

NZFF

Flight 1 ATR

Who is online