NZFF

by **CDTDAN** » Tue Dec 23, 2008 8:06 pm

Now that I've got the Skyhawk pit released, i'm getting bored. Of course i'll be forever updating it, but the time has come to create something new...

So i've decided I want to make a new panel from scratch, but I don't Know what I want to make

What do you guys want to see? I'm hoping for something military, or modern anyway. I'm not really interested in light aircraft like cessnas and all that, I kind of figured theres too much of that out there...

I've started editing a 737-400 panel I found on the net, I plan on puttin CRT and window reflections in along with better gauges and an updated bitmap.

Whay are you hoping for?! i.e. panel requests...

Dan

by **Ian Warren** » Tue Dec 23, 2008 9:11 pm

DAN , think we need the Huey .. UH1 Deane Baunton's for FSX

..

by **CDTDAN** » Tue Dec 23, 2008 9:30 pm

Ian Warren wrote:
QUOTE (Ian Warren @ Dec 23 2008, 10:11 PM) <{POST_SNAPBACK}>
DAN , think we need the Huey .. UH1 Deane Baunton's for FSX ..

Oooooh... Souds good

Not Quite up to scratch with a 'classic' helo's sytems though...

Dan

by **CDTDAN** » Tue Dec 23, 2008 10:40 pm

Any other requests? Nows your chance!

Dan

by **Adamski** » Tue Dec 23, 2008 11:10 pm

CDTDAN wrote:
QUOTE (CDTDAN @ Dec 23 2008, 11:40 PM) <{POST_SNAPBACK}>
Any other requests? Nows your chance!

Dan

Are we talking

here or

? There's a whole host of FS9 ports that I'm using in FSX that are badly let down by FS9->FSX panel/gauge anomalies. I could give you a list that'd keep you busy till FSXI

by **Ian Warren** » Tue Dec 23, 2008 11:14 pm

CDTDAN wrote:
QUOTE (CDTDAN @ Dec 23 2008, 11:40 PM) <{POST_SNAPBACK}>
Any other requests? Nows your chance!
Dan

Watch for the Screens .. and install your UH-1 .. page15 Hovercontrol.com ... brilliant

by **CDTDAN** » Tue Dec 23, 2008 11:25 pm

Adamski - I'm ready for the list!

Ian - I have the UH-1, although I don't think it's in my Rotorcraft folder, again i'm not at my computer... (haven't flown it in a while as I don't have rudder pedals... I've been in a real one though

)

Dan

by **Ian Warren** » Wed Dec 24, 2008 12:05 am

CDTDAN wrote:
QUOTE (CDTDAN @ Dec 24 2008, 12:25 AM) <{POST_SNAPBACK}>

Adamski - I'm ready for the list!
Ian - I have the UH-1, although I don't think it's in my Rotorcraft folder, again i'm not at my computer... (haven't flown it in a while as I don't have rudder pedals... I've been in a real one though )
Dan

I believe this one model can really rise to the occasion , 2002.. Yeah .. 2004 .. WOW .. still here .. 2009 .. I an,t finished YET

........... I'll be BACK

Website · by **Njbb1995** » Wed Dec 24, 2008 8:53 am

Would Deane update his UH1 For FSX? Hint hint

by **Ian Warren** » Wed Dec 24, 2008 11:03 am

njbb1995 wrote:
QUOTE (njbb1995 @ Dec 24 2008, 09:53 AM) <{POST_SNAPBACK}>
Would Deane update his UH1 For FSX? Hint hint

I think a good coat of paint

, photoreal , a few mods on the rotor texture and Dan,s handy work in the cockpit almost all it needs

and it will really suit the low end FSX PC in multiplay

by **2fst4u** » Wed Dec 24, 2008 12:17 pm

yea, a new huey panel would be good. i gave it a go but i dont have the time to do an overhaul. and a few texures dont work on fsx so they are transparent

by **Ian Warren** » Wed Dec 24, 2008 12:28 pm

2fst4u wrote:
QUOTE (2fst4u @ Dec 24 2008, 01:17 PM) <{POST_SNAPBACK}>
yea, a new huey panel would be good. i gave it a go but i dont have the time to do an overhaul. and a few texures dont work on fsx so they are transparent

wont require the overhaul , its pretty much perfect now

, think deane made this helo for mods and adapting , damn near like the real thing

...

by **CDTDAN** » Wed Dec 24, 2008 3:06 pm

Huey panel it is!!!

I'll get started tonight...

Dan

by **CDTDAN** » Wed Dec 24, 2008 6:17 pm

I've started...

It's going OK, but i'm not sure about all the gauges, and I don't know where to get them...

I've chosen just top 'update' Deane's old panel, and i've put relections on all the gauges and windows, and i'll update the bitmap.

Does anyone know where to get any good 'classic' chopper gauges?

Dan

by **Ian Warren** » Wed Dec 24, 2008 7:24 pm

be fine to use default 206 gauges

by **CDTDAN** » Wed Dec 24, 2008 8:08 pm

This panel might be a while... I'm not exactly satisfied with what I have so far, and I'm also working on a 737-400 panel, and I've just started a NH90 panel

I could release a gauge update just to have compatibility in FSX, and start a new panel later on...?!

Dan

by **Ian Warren** » Wed Dec 24, 2008 10:05 pm

CDTDAN wrote:
QUOTE (CDTDAN @ Dec 24 2008, 09:08 PM) <{POST_SNAPBACK}>
This panel might be a while... I'm not exactly satisfied with what I have so far, and I'm also working on a 737-400 panel, and I've just started a NH90 panel
I could release a gauge update just to have compatibility in FSX, and start a new panel later on...?!

If you like , send thru what you have , I have a panel/gauge design program

carry on with your own , NH90 is a primary

by **CDTDAN** » Thu Dec 25, 2008 10:32 pm

Is that CFG Edit? or is it FS Panel studio?

by **Ian Warren** » Thu Dec 25, 2008 11:23 pm

CDTDAN wrote:
QUOTE (CDTDAN @ Dec 25 2008, 11:32 PM) <{POST_SNAPBACK}>
FS Panel studio

Never really used it .. brought and shelved it , figured be a handy tool one day

by **CDTDAN** » Thu Jan 08, 2009 12:35 pm

Ok, its been a while, I have lots of thing on my list at the moment, so here goes

1. I plan on finishing the Iroquois panel
2. I have updated the Kahu pit
3. 737-400 alpha update for the FSX panel by Marco Spada
4. NH 90 Panel
5. And I really really want to make a F/A-18E Super Hornet panel!!!

Don't worry these will be completed in order

Pics:

The 737 panel update: (not finished)

A-4K pit update:

And the very very (very) beginnings of the NH 90 panel

Dan

NZFF

New Panel

Who is online