NZFF

by **Snowman** » Sun Jan 20, 2008 10:32 pm

Sorry guys, i think i may have forgotten to mention in the INSTALL instructions, that you NEED to make a COPY of the afcad file ( AF2_NZTH.bgl ) in my Thames "Scenery" folder, into FS9 / Scenery / World / Scenery.
This is necessary to make the flatten file for the airfield work properly.
Many apologies....................

Also forgot to include in the install instructions, the need for "EZ Fuel Tanks", by Sidney Schwartz.

Lawrie. >nzflag<

by **Bazza** » Mon Jan 21, 2008 8:50 am

Aha ..

Thanks Lawrie, had me beaten that time.

Actually tried to post you for advice but ran into a problem getting a post into the forum, there must have
been a glitch. That's made a huge difference. Once again thanks for your work...brillo.

by **Redda03** » Mon Jan 21, 2008 10:09 am

Thought it was my "finger trouble"!!!...got round it by develping my own flatten switch....seem to work OK:

Flatten.0=5,S37 09.19,E175 32.51,S37 09.19,E175 33.44,S37 09.81,E175 33.44,S37 09.81,E175 32.51

Will revert to correct install!!

Bob R

by **Bazza** » Mon Jan 21, 2008 2:58 pm

My Thames is looking pretty spot-on except for one small detail....

I am missing the building in front of the yellow hangar on the right, and
the similar building to the right of the left hand hangar (between the hangar
and the Mobil fitting. Obviously both from the same set of scenery that
I haven't installed.

Lawrie can you advise me which set these came from to save me downloading
everything that has "Buildings or Hangars" in their titles. I thought I had the field
covered but obviously not.

It's because of pests like me that I have steered away from designing sceneries.... :thumbup:

by **Snowman** » Mon Jan 21, 2008 3:46 pm

Bazza wrote:
QUOTE (Bazza @ Jan 21 2008, 03:58 PM) <{POST_SNAPBACK}>
My Thames is looking pretty spot-on except for one small detail....

I am missing the building in front of the yellow hangar on the right, and
the similar building to the right of the left hand hangar (between the hangar
and the Mobil fitting. Obviously both from the same set of scenery that
I haven't installed.

Lawrie can you advise me which set these came from to save me downloading
everything that has "Buildings or Hangars" in their titles. I thought I had the field
covered but obviously not.

It's because of pests like me that I have steered away from designing sceneries....

EZ Hangers by Dennis Waggoner, is the your missing object set......................

Lawrie. >nzflag<

by **Bazza** » Mon Jan 21, 2008 6:38 pm

You da man Lawrie, perfectamundo............. :clap:

Now when TopRob comes back from Holiday, and I suss out RealNZ Rotorua,
I'll put the whole lot on TradeMe and make a small fortune............ :bow:

by **SteelBlades** » Mon Jan 21, 2008 8:04 pm

Lawrie, where does the Mobil fitting come from?

Cheers,

by **hugh** » Mon Jan 21, 2008 8:37 pm

Snowman wrote:
QUOTE (Snowman @ Jan 25 2008, 11:32 AM) <{POST_SNAPBACK}>
i think i may have forgotten to mention in the INSTALL instructions, that you NEED to make a COPY of the afcad file ( AF2_NZTH.bgl ) Lawrie.

I'm kind of glad you did that-I've been working on a fix-up of the Kaipara Flats AF "trench" with a new flatten and couldnt figure out what I was doing wrong-was getting really frustrated then saw your post and tried copying the new AFCAD into "World" and hey, it worked! Now i just got to figure out excludes...

by **Snowman** » Mon Jan 21, 2008 10:28 pm

SteelBlades wrote:
QUOTE (SteelBlades @ Jan 21 2008, 09:04 PM) <{POST_SNAPBACK}>
Lawrie, where does the Mobil fitting come from?

Cheers,

Listed in the install instructions.....................

The Mobil tank is from EZ Fuel Tanks by Sidney Schwartz.
The Mobil pump is from gas pumps ss by Sidney Schwarz.

Lawrie. >nzflag<

by **SteelBlades** » Tue Jan 22, 2008 8:16 am

Snowman wrote:
QUOTE (Snowman @ Jan 21 2008, 11:28 PM) <{POST_SNAPBACK}>
Listed in the install instructions.....................

The Mobil tank is from EZ Fuel Tanks by Sidney Schwartz.
The Mobil pump is from gas pumps ss by Sidney Schwarz.

Lawrie.

That's what I would have expected. I'll (re)install* EZ Fuel Tanks and try again :-)

* I guess it's possible I missed installing it the first time

by **SteelBlades** » Tue Jan 22, 2008 9:47 pm

Snowman wrote:
QUOTE (Snowman @ Jan 21 2008, 11:28 PM) <{POST_SNAPBACK}>
Listed in the install instructions.....................

The Mobil tank is from EZ Fuel Tanks by Sidney Schwartz.
The Mobil pump is from gas pumps ss by Sidney Schwarz.

Lawrie.

Lawrie,

I've just gone through the install instructions carefully; EZ Fuel Tanks by Sidney Schwartz, isn't listed (which is why I missed it first time around). You may want to amend your instructions.

Cheers,

by **Snowman** » Wed Jan 23, 2008 2:25 pm

SteelBlades wrote:
QUOTE (SteelBlades @ Jan 22 2008, 10:47 PM) <{POST_SNAPBACK}>
Lawrie,

I've just gone through the install instructions carefully; EZ Fuel Tanks by Sidney Schwartz, isn't listed (which is why I missed it first time around). You may want to amend your instructions.

Cheers,

OOPS !!!

DEFINATELY My Bad there ............................... :arrr:

Sorry guys,................................. must be getting forgetful in my old age !! :lol:

Lawrie.

by **ranm** » Wed Jan 23, 2008 7:02 pm

Just realised I should have posted it in the support forum... oppsss

Sorry to trouble you Lawrie, but I am missing a texture for one of the hangars you are using and need your help identifing the right object. It's for the hangar next to the cessna building. see screenshot below

Many thanks - Ran

by **Snowman** » Thu Jan 24, 2008 2:27 pm

ranm wrote:
QUOTE (ranm @ Jan 23 2008, 08:02 PM) <{POST_SNAPBACK}>
Just realised I should have posted it in the support forum... oppsss

Sorry to trouble you Lawrie, but I am missing a texture for one of the hangars you are using and need your help identifing the right object. It's for the hangar next to the cessna building.

Many thanks - Ran

Hanger is part of the "EZ Vintage Hangers SS V3", object set, by Sidney Schwartz.

Make sure you have the "V3" version, as this has newer updated textures that the previous versions dont have.

Lawrie. >nzflag<

by **ranm** » Thu Jan 24, 2008 5:40 pm

Snowman wrote:
QUOTE (Snowman @ Jan 24 2008, 03:27 PM) <{POST_SNAPBACK}>
Hanger is part of the "EZ Vintage Hangers SS V3", object set, by Sidney Schwartz.

Sorry Lawrie, no luck there. I have re-downloaded and replaced the textures I already had installed in the object library, but to no avail. Are you able to pinpoint the texture file that is used with this hangar? - perhaps I have it duplicated somewhere.

Many thanks for your help

Ran

by **ilovetofly** » Mon Jan 28, 2008 8:11 pm

ranm wrote:
QUOTE (ranm @ Jan 23 2008, 09:40 PM) <{POST_SNAPBACK}>
Sorry Lawrie, no luck there. I have re-downloaded and replaced the textures I already had installed in the object library, but to no avail. Are you able to pinpoint the texture file that is used with this hangar? - perhaps I have it duplicated somewhere.

Many thanks for your help

Ran

by **ilovetofly** » Mon Jan 28, 2008 8:17 pm

I'm also missing a texture for the bldg. with the 'Cessna' sign. It's the large hanger and I've installed all required textures. It's the one on the right of the previously posted screenshot.
I'll recheck my EZ downloads and library files just to be sure. Please post where I can find this texture.
Thanks,
Jim D.
a.k.a. ilovetofly

by **Snowman** » Mon Jan 28, 2008 10:30 pm

ilovetofly wrote:
QUOTE (ilovetofly @ Jan 28 2008, 09:17 PM) <{POST_SNAPBACK}>
I'm also missing a texture for the bldg. with the 'Cessna' sign. It's the large hanger and I've installed all required textures. It's the one on the right of the previously posted screenshot.
I'll recheck my EZ downloads and library files just to be sure. Please post where I can find this texture.
Thanks,
Jim D.
a.k.a. ilovetofly

EZ Large Hangers ss, by Sidney Schwartz. Available from Avsim.com.

Lawrie. >nzflag<

by **ilovetofly** » Tue Jan 29, 2008 3:03 am

Snowman wrote:
QUOTE (Snowman @ Jan 28 2008, 02:30 AM) <{POST_SNAPBACK}>
EZ Large Hangers ss, by Sidney Schwartz. Available from Avsim.com.

Lawrie.

Thanks Lawrie but that wasn't it. All it changed was the color from white to gray. I meant to indicate the hanger with the "Piper" sign, not the "Cessna" sign.Sorry about that.
Jim D.
ilovetofly

by **Snowman** » Tue Jan 29, 2008 3:46 pm

ilovetofly wrote:
QUOTE (ilovetofly @ Jan 29 2008, 04:03 AM) <{POST_SNAPBACK}>
Thanks Lawrie but that wasn't it. All it changed was the color from white to gray. I meant to indicate the hanger with the "Piper" sign, not the "Cessna" sign.Sorry about that.
Jim D.
ilovetofly

Exactly the SAME hanger bulding, with just a DIFFERENT sign that i added to it.
I would say that you may already have that texture in one or more other active texture folder(s) in your sim.
Might have to be a good look through for double-ups, as this will cause the sim to "hunt" between any active texture folders containing the same texture, and usually FS cant resolve the problem of which one to use, so the building stays grey and untextured.

Lawrie. >nzflag<

NZFF

NZTH Thames Scenery correction

Who is online