If your using lyndimans-new-zealand-ortho-photography-set
His Installation Information
1 Once downloaded, copy the folders into your X-Plane\Custom Scenery
2 Edit your ini file
3 Load X-Plane and then immediate close it.
4 All of your new scenery will be added to your custom scenery.ini file.
5 Go to X-Plane\Custom Scenery and open the scenery_packs.ini file with a text editor.6 Move the lines referring to your new Ortho to the bottom. Make sure the Overlays folder is at the top.
Make sure no other meshes are loading on top of the ortho, such as the NZ Pro Scenery ie if you'vre updated to the recently updated UHD_Mesh_V4_New_Zealand (this would block the ortho)
Since AlpilotX has recently released a newer UHD mesh of New Zealand he has placed an Update comment notice on the x-plane-10-new-zealand-pro webpage March 23, 2018
If you are on X-Plane 11 Consider using New Zealand PRO Overlay with UHD Mesh Scenery v4 New Zealand region instead of the old mesh contained in this project (just leave out the mesh part here and install the UHD Mesh Scenery v4 New Zealand coverage … and put it below the New Zealand PRO Overlay in scenery_packs.ini)!
Since I use Thomas Rasmussen's File Naming convention for X-Plane 11\Custom Scenery
as per his Youtube clip X-plane 11 Basics - Scenery Installation
My Custom Scenery .ini file order looks like
So if you've downloaded AlpilotX New Zealand (1.6 GByte) XP11_UHD_Mesh_V4_New_Zealand.zip and followed the following from the readme.txt
- This part is very important! If you do not do this, you will very likely NOT see any of your other add-ons (airports etc.) in a given region anymore!
The reason is, that a "base mesh scenery" (which the UHD Mesh Scenery v4 is) forms the base of your landscape and only layers above it will be rendered!
Anything below the base mesh layer will not even be loaded.
(You only need to do this once, when you install your first UHD Mesh Scenery v4 package ...
All other packages are going in the same Custom Scenery folder, so they don't need extra attention)
- For UHD Mesh Scenery to works well with other Scenery Packages, its best to put it at the bottom(!) of scenery_packs.ini
BUT ABOVE ANY OTHER HD Mesh Scenery v4 (if you have also installed these too)!
If you want to learn more about how to best combine different scenery types and how to best use scenery_packs.ini, you might read this useful tutorial over at the Avsim Forum:Understanding Scenery Order
Hope this helps.