Posted: Sun Mar 11, 2007 12:22 amAfter seeing Brocks link to an incredable video here, I decided to try and copy what I saw in flightsim, taking an Aero Commander up high, then cutting the engines, diving down low to gain enough airspeed to pull a loop and make a horizontal role, before restarting the engines and landing (At NZWB).
Here are some screenies I took:
1. Climbing through 5000 feet:
2. Getting higher, over Blenhiem
3. Down we go, engines stopped
4. A top down view (for some reason the prop blades are not visable ???)
5. A VC view as we go up and over
6. An outside view
7. Back down over town
8. Finals for Woodbourne, a few seconds later the AFCAD dissapears and I land on grass beneath the runway
But, to really appeciate this, you need to see the recording I made, which can be used in Matthias Neusinger's flight recording module (found free at: http://www.neusinger.net/recorder ). Search avsim for 'Aero Commander Recording.zip' to play it.
Here are some screenies I took:
1. Climbing through 5000 feet:
2. Getting higher, over Blenhiem
3. Down we go, engines stopped
4. A top down view (for some reason the prop blades are not visable ???)
5. A VC view as we go up and over
6. An outside view
7. Back down over town
8. Finals for Woodbourne, a few seconds later the AFCAD dissapears and I land on grass beneath the runway
But, to really appeciate this, you need to see the recording I made, which can be used in Matthias Neusinger's flight recording module (found free at: http://www.neusinger.net/recorder ). Search avsim for 'Aero Commander Recording.zip' to play it.
TOTAL RECALL 
from an old video of the late 80's .... Im sure it must have been VODKA 