Page 1 of 1

PostPosted: Tue Dec 23, 2008 8:06 pm
by CDTDAN
Now that I've got the Skyhawk pit released, i'm getting bored. Of course i'll be forever updating it, but the time has come to create something new...

So i've decided I want to make a new panel from scratch, but I don't Know what I want to make unsure.gif

What do you guys want to see? I'm hoping for something military, or modern anyway. I'm not really interested in light aircraft like cessnas and all that, I kind of figured theres too much of that out there...

I've started editing a 737-400 panel I found on the net, I plan on puttin CRT and window reflections in along with better gauges and an updated bitmap.

Whay are you hoping for?! i.e. panel requests... winkyy.gif

Dan radar.gif

PostPosted: Tue Dec 23, 2008 9:11 pm
by Ian Warren
DAN , think we need the Huey .. UH1 Deane Baunton's for FSX thumbup1.gif .. biggrin.gif

PostPosted: Tue Dec 23, 2008 9:30 pm
by CDTDAN
Ian Warren wrote:
QUOTE (Ian Warren @ Dec 23 2008, 10:11 PM) <{POST_SNAPBACK}>
DAN , think we need the Huey .. UH1 Deane Baunton's for FSX thumbup1.gif .. biggrin.gif


Oooooh... Souds good thumbup1.gif

Not Quite up to scratch with a 'classic' helo's sytems though... unsure.gif

Dan radar.gif

PostPosted: Tue Dec 23, 2008 10:40 pm
by CDTDAN
Any other requests? Nows your chance!

Dan radar.gif

PostPosted: Tue Dec 23, 2008 11:10 pm
by Adamski
CDTDAN wrote:
QUOTE (CDTDAN @ Dec 23 2008, 11:40 PM) <{POST_SNAPBACK}>
Any other requests? Nows your chance!

Dan radar.gif

Are we talking fs9.gif here or fsx.gif? There's a whole host of FS9 ports that I'm using in FSX that are badly let down by FS9->FSX panel/gauge anomalies. I could give you a list that'd keep you busy till FSXI winkyy.gif

PostPosted: Tue Dec 23, 2008 11:14 pm
by Ian Warren
CDTDAN wrote:
QUOTE (CDTDAN @ Dec 23 2008, 11:40 PM) <{POST_SNAPBACK}>
Any other requests? Nows your chance!
Dan radar.gif

Watch for the Screens .. and install your UH-1 .. page15 Hovercontrol.com ... brilliant thumbup1.gif

PostPosted: Tue Dec 23, 2008 11:25 pm
by CDTDAN
fsx.gif

Adamski - I'm ready for the list! tongue.gif

Ian - I have the UH-1, although I don't think it's in my Rotorcraft folder, again i'm not at my computer... (haven't flown it in a while as I don't have rudder pedals... I've been in a real one though ninja.gif )

Dan radar.gif

PostPosted: Wed Dec 24, 2008 12:05 am
by Ian Warren
CDTDAN wrote:
QUOTE (CDTDAN @ Dec 24 2008, 12:25 AM) <{POST_SNAPBACK}>
fsx.gif
Adamski - I'm ready for the list! tongue.gif
Ian - I have the UH-1, although I don't think it's in my Rotorcraft folder, again i'm not at my computer... (haven't flown it in a while as I don't have rudder pedals... I've been in a real one though ninja.gif )
Dan radar.gif


I believe this one model can really rise to the occasion , 2002.. Yeah .. 2004 .. WOW .. still here .. 2009 .. I an,t finished YET cool.gif ........... I'll be BACK

PostPosted: Wed Dec 24, 2008 8:53 am
by Njbb1995
Would Deane update his UH1 For FSX? Hint hint

PostPosted: Wed Dec 24, 2008 11:03 am
by Ian Warren
njbb1995 wrote:
QUOTE (njbb1995 @ Dec 24 2008, 09:53 AM) <{POST_SNAPBACK}>
Would Deane update his UH1 For FSX? Hint hint

I think a good coat of paint biggrin.gif , photoreal , a few mods on the rotor texture and Dan,s handy work in the cockpit almost all it needs cool.gif

and it will really suit the low end FSX PC in multiplay wink.gif

PostPosted: Wed Dec 24, 2008 12:17 pm
by 2fst4u
yea, a new huey panel would be good. i gave it a go but i dont have the time to do an overhaul. and a few texures dont work on fsx so they are transparent

PostPosted: Wed Dec 24, 2008 12:28 pm
by Ian Warren
2fst4u wrote:
QUOTE (2fst4u @ Dec 24 2008, 01:17 PM) <{POST_SNAPBACK}>
yea, a new huey panel would be good. i gave it a go but i dont have the time to do an overhaul. and a few texures dont work on fsx so they are transparent

wont require the overhaul , its pretty much perfect now smile.gif , think deane made this helo for mods and adapting , damn near like the real thing ohmy.gif ...

PostPosted: Wed Dec 24, 2008 3:06 pm
by CDTDAN
Huey panel it is!!! thumbup1.gif

I'll get started tonight...

Dan radar.gif

PostPosted: Wed Dec 24, 2008 6:17 pm
by CDTDAN
I've started...

It's going OK, but i'm not sure about all the gauges, and I don't know where to get them...

I've chosen just top 'update' Deane's old panel, and i've put relections on all the gauges and windows, and i'll update the bitmap.



Does anyone know where to get any good 'classic' chopper gauges?

Dan radar.gif

PostPosted: Wed Dec 24, 2008 7:24 pm
by Ian Warren
be fine to use default 206 gauges cool.gif

PostPosted: Wed Dec 24, 2008 8:08 pm
by CDTDAN
This panel might be a while... I'm not exactly satisfied with what I have so far, and I'm also working on a 737-400 panel, and I've just started a NH90 panel tongue.gif

I could release a gauge update just to have compatibility in FSX, and start a new panel later on...?!

Dan radar.gif

PostPosted: Wed Dec 24, 2008 10:05 pm
by Ian Warren
CDTDAN wrote:
QUOTE (CDTDAN @ Dec 24 2008, 09:08 PM) <{POST_SNAPBACK}>
This panel might be a while... I'm not exactly satisfied with what I have so far, and I'm also working on a 737-400 panel, and I've just started a NH90 panel tongue.gif
I could release a gauge update just to have compatibility in FSX, and start a new panel later on...?!

If you like , send thru what you have , I have a panel/gauge design program thumbup1.gif carry on with your own , NH90 is a primary santa_cool.gif

PostPosted: Thu Dec 25, 2008 10:32 pm
by CDTDAN
Is that CFG Edit? or is it FS Panel studio? santa_cool.gif

PostPosted: Thu Dec 25, 2008 11:23 pm
by Ian Warren
CDTDAN wrote:
QUOTE (CDTDAN @ Dec 25 2008, 11:32 PM) <{POST_SNAPBACK}>
FS Panel studio

Never really used it .. brought and shelved it , figured be a handy tool one day rolleyes.gif

PostPosted: Thu Jan 08, 2009 12:35 pm
by CDTDAN
Ok, its been a while, I have lots of thing on my list at the moment, so here goes ninja.gif

1. I plan on finishing the Iroquois panel
2. I have updated the Kahu pit
3. 737-400 alpha update for the FSX panel by Marco Spada
4. NH 90 Panel
5. And I really really want to make a F/A-18E Super Hornet panel!!!

Don't worry these will be completed in order biggrin.gif

Pics:

The 737 panel update: (not finished)



A-4K pit update:



And the very very (very) beginnings of the NH 90 panel tongue.gif



Dan tongue.gif