Posted: Wed Apr 18, 2007 8:23 pmHaving installed GNZLAP is there any way I can check to see if it is working?. Cheers.
Pat
Pat
Page 1 of 1
Posted: Wed Apr 18, 2007 8:23 pmPosted: Wed Apr 18, 2007 8:27 pmThere are flights included for that very purpose - Go to "NZ" and pick one
Posted: Thu Apr 19, 2007 11:42 amCharl wrote: There are flights included for that very purpose - Go to "NZ" and pick one
Picked Paraparaumu and see no change. Perhaps I am expecting too much eh?.
Posted: Thu Apr 19, 2007 5:16 pmHi Pato
There are over 200 a/c flying around with a few from Paraparaumu (will last time I looked anyway) so you should see something - have you tried other flights? If you still don't see anything it maybe an issue on how it is installed.
Cheers
There are over 200 a/c flying around with a few from Paraparaumu (will last time I looked anyway) so you should see something - have you tried other flights? If you still don't see anything it maybe an issue on how it is installed.
Cheers
Posted: Thu Apr 19, 2007 5:55 pmSee Read This.doc that comes with the package:
Start Flight Sim, go to "Select Flights", scroll down, there is a category called "NZ".
Pick a flight from there.
If no AI appears, look to the installation and AI settings in your sim.
Start Flight Sim, go to "Select Flights", scroll down, there is a category called "NZ".
Pick a flight from there.
If no AI appears, look to the installation and AI settings in your sim.
Posted: Thu Apr 19, 2007 8:52 pmThanks Naki and Charl for your help. Cheers.