Ian Warren wrote:QUOTE (Ian Warren @ Jan 17 2015,6:30 PM) <{POST_SNAPBACK}>Welcome to NZFF DW , What is the scenery requirement , that is a primary with many doing MP's
Just an up to date scenery is recommended so you can get good taxi instructions, old sceneries might have different signs for the taxiways but Wellington hasn't changed much. Come along and have a go. Have a read of this if it's your first time or thinking of joining the fun!
https://onedrive.live.com/redir?page=vi ... -KKvM9w_GILast edited by NZ255 on Sun Jan 18, 2015 1:47 am, edited 1 time in total.Nick
NZ255 wrote:QUOTE (NZ255 @ Jan 18 2015,2:29 AM) <{POST_SNAPBACK}>Come along and have a go. Have a read of this if it's your first time or thinking of joining the fun!
Thanks Nick I'll see how I go .... I do love my MPs course never really tried out VATNZ, maybe I jump in the tower, listen watch and learn, as for the aircraft then , is it required to have as many installed as possible ?
Ian Warren wrote:QUOTE (Ian Warren @ Jan 18 2015,9:44 AM) <{POST_SNAPBACK}>Thanks Nick I'll see how I go .... I do love my MPs course never really tried out VATNZ, maybe I jump in the tower, listen watch and learn, as for the aircraft then , is it required to have as many installed as possible ?
I have the ftx Ai package as I only fly nz and Aus. For the vpilot client (to connect to vatsim) you can write (or use an existing on if it's a popular package) a model matching guide so you see the current planes. Do you have any Ai packages installed?
It's not a requirement as if the program can't find a match it will use the default Airbus. But you might change that to a 737Nick
Ian Warren wrote:QUOTE (Ian Warren @ Jan 18 2015,11:20 AM) <{POST_SNAPBACK}>I run the the FTX-AI , can you run a ..example a payware PMDG1900 ... funny I'd have to dig that one up.
As AI, or what you fly?
You can fly as anything (except a space shuttle I think). The Aircraft code would be "B190". Of course, you don't have to fly IFR... you could request a VFR flight somewhere - just consult the AIP charts first as there are VFR departures and arrivals for Airports and in your clearance you'd get something like the 34 Sinclair Departure the charts have instructions on how to fly it and leave the control zone.Nick
Ian Warren wrote:QUOTE (Ian Warren @ Jan 18 2015,12:29 PM) <{POST_SNAPBACK}>I'll see how I go, even if only I get setup for next time, how valid is ANZ Vol4 AIP for the MP.
Yeah just park up and have a listen on different channels. Vol4, not sure...see if you can compare departures for names. Probably out of date. Do you have the TPAPA arrivals into NZWN?Nick
Ian Warren wrote:QUOTE (Ian Warren @ Jan 18 2015,2:20 PM) <{POST_SNAPBACK}>I do have the radials and circuit approach , you would find all this is still valid as it was effective 28 Sep 06.
Yeah but the latest one's were valid 24/07/14 haha
The ILS DME could still be the same. 109.90 for ILS 34 and 110.30 for ILS 16?Nick
NZ255 wrote:QUOTE (NZ255 @ Jan 18 2015,2:33 PM) <{POST_SNAPBACK}>Yeah but the latest one's were valid 24/07/14 haha
The ILS DME could still be the same. 109.90 for ILS 34 and 110.30 for ILS 16?
All that is correct , when first did a set off maps back in 1998 , you would find new all NAV/NDB/ILS has not change and in fact still useable .. a few have been remove and deleted but you would find them fine to navigate into anywhere down to 200ft .
Ian Warren wrote:QUOTE (Ian Warren @ Jan 18 2015,2:40 PM) <{POST_SNAPBACK}>All that is correct , when first did a set off maps back in 1998 , you would find new all NAV/NDB/ILS has not change and in fact still useable .. a few have been remove and deleted but you would find them fine to navigate into anywhere down to 200ft .
Will you be using FSX or p3d? I'll share my FTX AU AI file to get model matching with vPilot.Nick
NZ255 wrote:QUOTE (NZ255 @ Jan 18 2015,3:52 PM) <{POST_SNAPBACK}>Will you be using FSX or p3d? I'll share my FTX AU AI file to get model matching with vPilot.
Update your FTX AI pack to fix an issue regarding the 737-800 and 777 showing.
https://www.fullterrain.com/freeware/ai
Redownload (even if you already have it installed) v4.2 for FSX or 4.21 or P3Dv2
In vPilot go to Settings > Model Matching > Add Custom File(s)...
Download and add this file http://1drv.ms/1xEnh7A to enable FTX AI model matching.Last edited by NZ255 on Sun Jan 18, 2015 4:18 pm, edited 1 time in total.Nick
NZ255 wrote:Download and add this file http://1drv.ms/1xEnh7A to enable FTX AI model matching.
mfraser wrote:NZ255 wrote:Download and add this file http://1drv.ms/1xEnh7A to enable FTX AI model matching.
Hi Nick - after some 4+ years away from simming I'm finally in a position to look at getting airborne again!
I plan to do some VATNZ observing this weekend to test my VATSIM/Simpit integration. I also need to sort out the vPilot model matching.
Would you be so kind as to re-activate the link to your FTX AU AI model matching file again please? I've just installed v5.0... is it just me or is the sound from the AI aircraft far too loud?
Cheers and thanks!
Mat
NZ255 wrote:Here you go, I ended up updating for v5 as I needed to do it anyway. I was going to link you to my vatsim first time ATC guide... but you probably won't need that
Nick
mfraser wrote:NZ255 wrote:Here you go, I ended up updating for v5 as I needed to do it anyway. I was going to link you to my vatsim first time ATC guide... but you probably won't need that
Nick
...Cheers Nick
Users browsing this forum: No registered users and 3 guests